| No. | Part Name | Description |
|---|
| 351 | AB-097 | DDC101 EVALUATION FIXTURE PC INTERFACE BOARD |
| 352 | AB-098 | SELECTING AN A/D CONVERTER |
| 353 | AB-099 | AN EASY SOLUTION TO CURRENT LIMITING AN OP AMP |
| 354 | AB-100 | MULTIPLEXER DATA ACQUISTION SYSTEM |
| 355 | AB-101 | COMBINING AN AMPLIFIER WITH THE BUF634 |
| 356 | AB-102 | OUTPUT SPECTRUM AND POST-LPF DESIGN OF THE PCM1710 |
| 357 | AB-103 | NOISE ANALYSIS FOR HIGH SPEED OP AMPS |
| 358 | AB-104 | DYNAMIC PERFORMANCE TESTING OF DIGITAL AUDIO D/A CONVERTERS |
| 359 | AB-105 | TUNING IN AMPLIFIERS |
| 360 | AB-106 | PROGRAMMING TRICKS FOR HIGHER CONVERSION SPEEDS UTILIZING DELTA SIGMA CONVERTERS |
| 361 | AB-107 | GIVING CONVERTERS A LITTLE GAIN BOOST WITH A FRONT END ANALOG GAIN STAGE |
| 362 | AB-109 | ADS7809 TAG FEATURE |
| 363 | AB-110 | VOLTAGE REFERENCE SCALING TECHNIQUES Increase the Accuracy of the Converter as well as Resolution |
| 364 | AB-111 | DEM-ADS1210 |
| 365 | AB-112 | INTERFACING THE ADS1210 WITH AN 8xC51 MICROCONTROLLER |
| 366 | AB-113 | ACCESSING THE ADS1210 DEMO BOARD WITH YOUR PC |
| 367 | AB-115 | OVERDRIVING THE INPUTS TO THE ADS1210, ADS1211, ADS1212, AND ADS1213 |
| 368 | AB-116 | SYNCHRONIZATION OF EXTERNAL ANALOG MULTIPLEXERS WITH THE DELTA-SIGMA A/D CONVERTERS |
| 369 | AB-117 | SHORT CYCLING THE 8-PIN ADS78xx FAMILY |
| 370 | AB-118 | EXTRACT AND DIGITIZE AC SIGNALS WITH A SINGLE A |
| 371 | AB-119 | A "GETTING STARTED" GUIDE FOR THE CONVERTERS: ADS1210, ADS1211, ADS1212, ADS1213, ADS1214, AND ADS1215 |
| 372 | AB-120 | HOW TO GET 23 BITS OF EFFECTIVE RESOLUTION FROM YOUR 24-BIT CONVERTER |
| 373 | AB-121 | PRECISION ABSOLUTE VALUE CIRCUITS |
| 374 | AB-122 | INTERFACING THE ADS7822 TO THE SYNCHRONOUS SERIAL PORT OF THE 80x51 MICROCONTROLLER |
| 375 | AB-123 | USING THE CONTINUOUS PARALLEL MODE WITH THE ADS7824 AND ADS7825 |
| 376 | AB-124 | THD+N VERSUS FREQUENCY CHARACTERISTICS AND SPECTRA OF THE PCM1717 |
| 377 | AB-125 | CUSTOMIZING THE DDC112 EVALUATION FIXTURE |
| 378 | AB-127 | ADS121x ANALOG-DIGITAL CONVERTER APPLICATIONS PRIMER |
| 379 | AB-130 | INTERFACING THE DAC714 TO MICRO-CONTROLLERS VIA SPI |
| 380 | AB-131 | UNDERSTANDING THE DDC112+s CONTINUOUS AND NON-CONTINUOUS MODES |
| 381 | AB-132 | SOLDER PAD RECOMMENDATIONS FOR SURFACE-MOUNT DEVICES |
| 382 | AB-135 | The DDC112's Test Mode |
| 383 | AB-136 | RETRIEVING DATA FROM THE DDC112 |
| 384 | AB-137 | ADD CURRENT LIMIT TO THE BUF634 |
| 385 | AB-138 | USING EXTERNAL INTEGRATION CAPACITORS ON THE DDC112 |
| 386 | AB-142 | ADS7843 PEN INTERRUPT |
| 387 | AB-143 | Multi-DDC112 DUT Board for the DDC112 Evaluation Fixture |
| 388 | AB-144 | NEW SOFTWARE FOR THE DDC112 EVALUATION FIXTURE |
| 389 | AB-146 | USING THE ADS1201 EVALUATION BOARD |
| 390 | AB-147 | Control Port and Reset Operation for Burr-Brown SoundPlus Audio Converters and CODECs |
| 391 | AB-148 | Low Sampling Rate Operation For Burr-Brown SoundPlus Audio Data Converters And CODECs |
| 392 | AB-150 | CREATING A BIPOLAR INPUT RANGE FOR THE DDC112 |
| 393 | AB-151 | FOUR-WIRE RTD CURRENT-LOOP TRANSMITTER: Four-Wire Connections to an RTD Allow the RTD to be Remotely Located from Active Circuitry, Yet Maintain Accuracy |
| 394 | AB-152 | DC MOTOR SPEED CONTROLLER: Control a DC Motor without Tachometer Feedback |
| 395 | AB-161 | AN ERROR ANALYSIS OF THE ISO102 IN A SMALL SIGNAL MEASURING APPLICATION |
| 396 | AB-162 | DC-TO-DC CONVERTER NOISE REDUCTION |
| 397 | AB-163 | PARTIAL DISCHARGE TESTING: What It Is and What It Means |
| 398 | AB-165 | IMPLEMENTATION AND APPLICATIONS OF CURRENT SOURCES AND CURRENT RECEIVERS |
| 399 | AB-167 | COMPARING THE ADS1201 TO THE CS5321 |
| 400 | AB-175 | CODING SCHEMES USED WITH DATA CONVERTERS |
| | |
