56513 | STEVAL-ISA113V1 | Wide range single-output demonstration board based on the VIPER06HS |
56514 | STEVAL-ISA114V1 | 5 V/0.8 W wide-range 30 kHz buck converter based on the VIPer06XS |
56515 | STEVAL-ISA115V1 | 12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS |
56516 | STEVAL-ISA116V1 | 5 W, 2-output wide-range buck converter based on the VIPER26LD |
56517 | STEVAL-ISA117V1 | Wide range isolated flyback demonstration board, single output 12 V/4.2 W based on the VIPer16LN |
56518 | STEVAL-ISA118V1 | Offline power converter demonstration board using the Viper16 |
56519 | STEVAL-ISA119V1 | 1.5 W double output buck demonstration board based on the VIPER16LD |
56520 | STEVAL-ISA121V1 | Wide range single-output demonstration board based on the VIPER37LE |
56521 | STEVAL-ISA122V1 | Wide input-range, single-output 5 V / 11 W power supply demonstration board based on the VIPer27 |
56522 | STEVAL-ISA124V1 | 5 W low standby consumption battery charger demonstration board based on the VIPER17HN |
56523 | STEVAL-ISA125V1 | 5 V/10 W, 60 kHz isolated flyback with extra power management based on the VIPer28L |
56524 | STEVAL-ISA126V1 | 5 V-2 A, 115 kHz flyback with temporary extra-power management based on the VIPER28HN |
56525 | STEVAL-ISA129V1 | 16 V-280 mA non isolated off-line high voltage converter based on the VIPer16H |
56526 | STEVAL-ISA130V1 | 12 V 140 mA 30 kHz non-isolated buck topology regulator based on VIPer06XN |
56527 | STEVAL-ISA131V1 | 1.82 V - 500 mA, 6 MHz synchronous step-down converter based on the ST1S15 |
56528 | STEVAL-ISA131V3 | 1.82 V - 500 mA, 6 MHz synchronous step-down converter based on the ST1S15 |
56529 | STEVAL-ISA133V1 | Double output SMPS for power line applications using the ALTAIR04-900 primary controller |
56530 | STEVAL-ISA134V1 | 12 V - 4 W, 115 kHz isolated flyback based on the VIPer06 |
56531 | STEVAL-ISA135V1 | 4 W, 12 V output, isolated flyback converter using VIPer™ Plus - VIPER06HS |
56532 | STEVAL-ISA136V1 | 3W, 5V output, isolated flyback converter using VIPer™ Plus - VIPER06HN |
56533 | STEVAL-ISA137V1 | Demonstration board based on VIPer06 from the fixed-frequency VIPer™ plus family |
56534 | STEVAL-ISA138V1 | 19 V - 90 W adapter with PFC for laptop computers using the L6563H and L6699 |
56535 | STEVAL-ISA140V1 | 12 V/15 W wide range single output evaluation board based on the VIPER37HE |
56536 | STEVAL-ISA141V1 | 2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J |
56537 | STEVAL-ISA141V2 | 2 A, high efficiency single inductor buck-boost DC-DC converter and high brightness white LED driver based on the STBB3JCC |
56538 | STEVAL-ISA142V1 | 50 W wide-range high power factor flyback converter using the L6564 |
56539 | STEVAL-ISA143V1 | 12 V - 150 W resonant converter with synchronous rectification using the L6563H, L6699 and SRK2000 |
56540 | STEVAL-ISA144V1 | 1.5 A step-down switching regulator demonstration board based on the L5983 |
56541 | STEVAL-ISA145V1 | 250 W ATX SMPS demonstration board |
56542 | STEVAL-ISA146V1 | 4 A step-down switching evaluation board based on the ST1S50 |
56543 | STEVAL-ISA147V2 | 500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller |
56544 | STEVAL-ISA148V1 | 19 V - 90 W adapter with PFC for laptop computers based on L6563H and L6599A |
56545 | STEVAL-ISA152V1 | 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987 |
56546 | STEVAL-ISA153V1 | 12 V, 15 W (20 W peak) isolated flyback converter based on the VIPER38LE |
56547 | STEVAL-ISA154V1 | 0.7 A step-down switching regulator evaluation board based on the L5980 |
56548 | STEVAL-ISA155V1 | 1 A constant current battery charger evaluation board based on the L6902D |
56549 | STEVAL-ISA156V1 | 38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6986 |
56550 | STEVAL-ISA159V1 | High efficiency synchronous step-down regulator based on L6984 |
56551 | STEVAL-ISA161V1 | Evaluation board for the SEA01 constant voltage and current controller with online digital trimming |
56552 | STEVAL-ISB005V1 | Low-cost Li-Ion battery charger demonstration board based on the ST7260 and L6924D |
56553 | STEVAL-ISB009V1 | Li-Ion battery monitoring and gas gauge evaluation board based on STC3100 |
56554 | STEVAL-ISB012V1 | Battery monitoring system demonstration board based on the STC3105 |
56555 | STEVAL-ISB013V1 | Battery monitor demonstration board with alarm output for gas gauge applications based on the STC3105 |
56556 | STEVAL-ISB014V2 | Battery monitoring with alarm output for gas gauge applications based on the STC3115 |
56557 | STEVAL-ISB018V1 | Evaluation board for STCC5021 USB charging controller with attach detection |
56558 | STEVAL-ISB019V1 | Evaluation board for STCC2540 USB charging controller |
56559 | STEVAL-ISB032V1 | Li-Ion linear battery charger with LDO |
56560 | STEVAL-ISC001V1 | 30 W AC-DC adapter based on the L6565 |
56561 | STEVAL-ISC002V1 | Resonant LCC 90 W notebook power adapter based on the L6599 and STP9NK50ZF |
56562 | STEVAL-ISQ007V1 | High-side current-sense amplifier demonstration board based on the TSC101 |
56563 | STEVAL-ISQ010V1 | High-side current-sense amplifier demonstration board based on the TSC102 |
56564 | STEVAL-ISQ013V1 | Low side current sensing based on TS507 |
56565 | STEVAL-ISQ014V1 | Low-side current sensing evaluation board based on the TSZ121 op amp |
56566 | STEVAL-ISS001V1 | Line interactive 450 W UPS reference design - 120 V / 60 Hz model |
56567 | STEVAL-ISS001V2 | Line interactive 450 W UPS reference design - 230 V / 50 Hz model |
56568 | STEVAL-ISV003V2 | 250 W microinverter for plug-in PV panels (60 Hz version) |
56569 | STEVAL-ISV005V2 | 240 W photovoltaic battery charger based on the SPV1020 |
56570 | STEVAL-ISV006V2 | Up to 5 W solar battery charger with embedded MPPT based on SPV1040 |
56571 | STEVAL-ISV008V1 | 300 W PV converter demonstration board to be integrated into a photovoltaic panel based on the SPV1020 |
56572 | STEVAL-ISV009V1 | 300 W photovoltaic converter demonstration board based on the SPV1020 |
56573 | STEVAL-ISV012V1 | Solar battery charger for Li-Ion batteries |
56574 | STEVAL-ISV013V1 | 250 W DC-DC solar module demonstration board for distributed photovoltaic architecture |
56575 | STEVAL-ISV015V1 | Up to 2.5 W solar USB supply based on the SPV1040 and LD39050 |
56576 | STEVAL-ISV018V1 | 300 W PV converter to be integrated into a photovoltaic panel based on SPV1020 and bypass diodes SPV1001N30 and SPV1001N40 |
56577 | STEVAL-ISV019V1 | Evaluation Board for SPV1050 ULP Energy Harvester and Battery Charger - Boost Configuration |
56578 | STEVAL-ISV021V1 | Energy harvesting Evaluation kit based on the SPV1050 |
56579 | STEVAL-MKI009V1 | LIS3LV02DL adapter board designed to be plugged into a standard DIL 20 socket |
56580 | STEVAL-MKI013V1 | Standard DIL 24 socket-compatible adapter board for testing the LIS302DL |
56581 | STEVAL-MKI015V1 | Adapter board for the LIS344ALH |
56582 | STEVAL-MKI031V1 | Multi sensor application (MuSA) board platform |
56583 | STEVAL-MKI072V1 | MEMS demonstration board based on LY3100ALH (analog output single-axis gyroscope) |
56584 | STEVAL-MKI075V1 | LY3100ALH adapter board designed for a standard DIL24 socket |
56585 | STEVAL-MKI077V1 | MEMS: demonstration board based on the LPR4150AL (analog output two axis gyroscope) |
56586 | STEVAL-MKI078V1 | MEMS demonstration board based on the LPR450AL analog output dual-axis gyroscope |
56587 | STEVAL-MKI079V1 | MEMS demonstration board based on the LPR430AL (analog output two-axis gyroscope) |
56588 | STEVAL-MKI080V1 | MEMS demonstration board based on LPR410AL (analog output two axis gyroscope) |
56589 | STEVAL-MKI081V1 | MEMS demonstration board based on LPR403AL (analog output two-axis gyroscope) |
56590 | STEVAL-MKI084V1 | LPY430AL adapter board designed to be plugged into a standard DIL24 socket |
56591 | STEVAL-MKI087V1 | LIS331DL adapter board for standard DIL 24 socket |
56592 | STEVAL-MKI089V1 | LIS331DLH adapter board for standard DIL 24 socket |
56593 | STEVAL-MKI097V1 | LPR430AL adapter board designed to be plugged into a standard DIL24 socket |
56594 | STEVAL-MKI098V1 | LPR410AL adapter demonstration board for a standard DIL24 socket |
56595 | STEVAL-MKI101V1 | MEMS demonstration board based on LPY450AL (dual-axis pitch and yaw ±500 dps analog gyroscope) |
56596 | STEVAL-MKI103V1 | MEMS demonstration board based on the LPY410AL (dual-axis pitch and yaw ±100 dps analog gyroscope) |
56597 | STEVAL-MKI104V1 | MEMS demonstration board based on LPY403AL (dual-axis pitch and yaw ±30 dps analog gyroscope) |
56598 | STEVAL-MKI105V1 | LIS3DH adapter board for standard DIL 24 socket |
56599 | STEVAL-MKI106V1 | LSM303DLHC adapter board designed to be plugged into a standard DIL24 socket |
56600 | STEVAL-MKI107V2 | L3GD20 adapter board for a standard DIL 24 socket |
| | |